SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Oil Filter /cgi-bin/YaBB.pl?num=1366762911 Message started by RatdogWillie on 04/23/13 at 17:21:50 |
Title: Oil Filter Post by RatdogWillie on 04/23/13 at 17:21:50 I recently purchased a 2004 Savage with 8,008 miles. Due to info I found here, I replaced the petcock with a Raptor. Today I change the oil and filter using Rotella T Triple Protection 15W40 with Redline added (5 oz to 1 gallon) and a K&N filter. I am confused by a post/photo made sometime ago. http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1099572561 The comment was made, “ok newbs, pay close attention here...’ and this photo was posted. http://Re: Oil Change time Reply #4 - 04/24/09 at 02:28:04 Alert Board Moderator about this Post! Quote ok newbs, pay close attention here...[img] Is this outward hole the smaller filter hole? There is a larger hole that I can actually put my finger in on one side of the filter and a smaller hole on the opposite side of the filter that I cannot put my finger in. The hole that I see in the photo appears to be the smaller hole. |
Title: Re: Oil Filter Post by Serowbot on 04/23/13 at 18:15:28 Big hole points to the engine.... little hole faces you, and gets a spring placed between it and the cover... |
Title: Re: Oil Filter Post by justin_o_guy2 on 04/23/13 at 18:27:57 Put the filter in bakkerds & ya get a filter sized hole in the cover AND a ruined motor. |
Title: Re: Oil Filter Post by RatdogWillie on 04/23/13 at 18:57:52 Thank! I went ahead with the installation and put the big hole toward the engine....started it up and all seemed fine. The oil remained in the engine and when shut off, the level was fine. [img][/img] |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |