SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Help wanted, spark plug or ignition coil issue /cgi-bin/YaBB.pl?num=1366481581 Message started by JPSBOBBER on 04/20/13 at 11:13:01 |
Title: Help wanted, spark plug or ignition coil issue Post by JPSBOBBER on 04/20/13 at 11:13:01 So i changed the spark plug, and as i do with cars, i carefully pulled on the plug cable (by the cap, never by the cables) to remove it, is this wrong ? Am i supposed to unscrew it since there is thread on the spark plug ?? Also, when i removed the plug, a brass color fitting, the one that hold the plug, fell, followed by a kind of "flint" and a spring... Is there an order to reassembe this (if reassembly is even possible..) |
Title: Re: Help wanted, spark plug or ignition coil issue Post by verslagen1 on 04/20/13 at 11:17:39 I had this happen a month or two ago, spring, flint, then screw. should be fine after. |
Title: Re: Help wanted, spark plug or ignition coil issue Post by JPSBOBBER on 04/20/13 at 11:31:59 thank you very much versy, and do i have to screw and unscrew for removal or do i pull and push back in the cable for spark plug changing ? |
Title: Re: Help wanted, spark plug or ignition coil issue Post by verslagen1 on 04/20/13 at 11:36:44 no screw, would be really inconvenient. remove coil, twist until release... naw. just push on and pull off |
Title: Re: Help wanted, spark plug or ignition coil issue Post by JPSBOBBER on 04/20/13 at 11:41:16 Thanks a lot, made my day by removing that stress !! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |