SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> brake line /cgi-bin/YaBB.pl?num=1365016335 Message started by nateordie on 04/03/13 at 12:12:15 |
Title: brake line Post by nateordie on 04/03/13 at 12:12:15 I swapped out my handlebars recently for clubmans and got bigger shocks for the back to raise up the rear to give my savage a different look. I now need a new shortened brake line. Ryca sells a 30 inch one for 75 dollars. Does anyone know of a place I can get one for cheaper? Thanks. |
Title: Re: brake line Post by Dave on 04/03/13 at 13:30:39 You can get this one from Motorcycle Superstore for $ 35.99 plus shipping: http://www.motorcycle-superstore.com/14/71/983/28909/ITEM/Streamline-Universal-Braided-Stainless-Steel-Brake-Line.aspx?WT.ac=RichAutoComplete You can get this one from Vehnill in any color or length you want with chrome plated fittings for $ 41.98 plus shipping. http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel-Brake-LineCustom-Make-Your-Own-Brake-Line-KitOne-Line-with-Chrome-Fittings-p703.html Or you can get the Venhill kit with stainless fittings for $ 59.98 plus shiping: http://www.venhillusa.com/Venhill-Custom-Shop/Venhill-Braided-Stainless-Steel-Brake-Line-Custom-Make-Your-Own-Brake-Line-KitOne-Line-with-Stainless-Steel-Fittings-p705.html Most people use a 30" length - I used 31" with mine as I used a different master cylinder. |
Title: Re: brake line Post by EJID on 04/03/13 at 14:00:22 I bought one from this guy off eBay...good quality product, you state the length you want and identify the fittings when you order it. Shipped from Canada, but I don't think it took very long to get here when I ordered mine. http://www.ebay.com/itm/SUZUKI-LS650PY-CUSTOM-STAINLESS-STEEL-BRAKE-LINE-HOSE-/400449685506?pt=Motorcycles_Parts_Accessories&hash=item5d3ca94802 http://i.ebayimg.com/t/SUZUKI-LS650PY-CUSTOM-STAINLESS-STEEL-BRAKE-LINE-HOSE-/00/s/NTAwWDUwMA==/$(KGrHqV,!i0E6I+8+lNTBOnvko3fKw~~60_12.JPG |
Title: Re: brake line Post by nateordie on 04/03/13 at 14:42:21 EJID, what fittings did you use? |
Title: Re: brake line Post by EJID on 04/03/13 at 14:59:21 383722333924323F33560 wrote:
Here is the note from my original order... "Hose 1 Fittings #1 & #4 (10mm Straight & 10mm 45 Degree) Length 42" (end to end including fittings) Angle: Type C (90 Degree)" I used this cable to extend my brake line for putting on mini-apes (from a FXDWG) and if I did it again, I would add another 1" in length (almost too short). It's been a while now, and I'm not sure if the Angle Type C is the correct one to use, seems like I had a little trouble with the angle, but I would have to look it over again to decide. I was happy with my purchase though and would use them again if I need another line. :) Good luck |
Title: Re: brake line Post by nateordie on 04/03/13 at 15:01:17 EJID, Thanks! |
Title: Re: brake line Post by rfbznb on 04/03/13 at 18:29:13 I got this one and it took 6 days to get it I ordered with the fitting below and it fits great it was for taller and wider bars oem is 42" http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&vxp=mtr&item=271171183195 1) 47 inches 2) fitting G and H 3) black color brake hose 4) type C |
Title: Re: brake line Post by nateordie on 04/03/13 at 23:25:58 Thanks for the feedback everyone! Much appreciated. :) |
Title: Re: brake line Post by Cavi Mike on 04/05/13 at 07:19:55 I got some brake lines for my old Corolla from this guy. They look real nice. I actually didn't know he makes them himself - they look like store-bought items. |
Title: Re: brake line Post by verslagen1 on 04/05/13 at 08:35:36 595655581C0 wrote:
I believe I got angle C = 0° and had trouble with it also. I ordered clear covering, but that doesn't last too long. If I order again, it'll be black. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |