SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> how to fit a rear fender tire size 140/80-15 /cgi-bin/YaBB.pl?num=1363726324 Message started by maxximus on 03/19/13 at 13:52:04 |
Title: how to fit a rear fender tire size 140/80-15 Post by maxximus on 03/19/13 at 13:52:04 Will someone please help me I'm trying to fabricat/fit a rear fender on my 1997 savage but I don't have idea how to do it or start. Thanks and have yourself a savage day :o :'( |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by Steve H on 03/19/13 at 17:11:52 What's wrong with just buying one from ebay? Or, is the intention to get away from the stock fender for some reason? |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by maxximus on 03/19/13 at 17:32:14 I'm sorry I didn't put that I'm tuning it into a bobber that's why I'm not using the stock fender |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by Kimito on 03/19/13 at 17:35:54 Just had a same question posted... suggestion was that it is heard in the savage society that trailer fenders would work great with low price,, havn't tried my self, but should be good |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by ZAR on 03/19/13 at 18:28:59 7B6567393C3E3C0C0 wrote:
Very true! Go to your local Ag store(Tractor supply,Orschlens,Rural King) or a Harbor Freight outlet and check out the fender selections. There will be some that will fit the Savage,and cheaply! Several here have posted pics of theirs. If I decide to build a custom Savage I'd like to use an aluminum diamond plate trailer fender. |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by maxximus on 03/19/13 at 21:02:56 Thank you'll for your input and I'm going to try the trailer fender idea and I will post the results on this thread again thanks. And have yourself a savage day!!! 8-) |
Title: Re: how to fit a rear fender tire size 140/80-15 Post by Demin on 03/20/13 at 04:16:15 All of these are trailer fenders.First two cut to length,third as is.Drill and bolt to stock location.And cut out for belt clearance. http://p1.bikepics.com/2008/05/23/bikepics-1298492-800.jpg http://p1.bikepics.com/2009/08/08/bikepics-1749163-800.jpg http://p1.bikepics.com/2012/09/09/bikepics-2453237-full.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |