SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> cam chain tensioner mod /cgi-bin/YaBB.pl?num=1363274880 Message started by Krowl on 03/14/13 at 08:28:00 |
Title: cam chain tensioner mod Post by Krowl on 03/14/13 at 08:28:00 I'm thinking on doing the cam chain tensioner mod on my 95 savage with 14,000 miles on her. I measured the tensioner that is in there and its about 20cm. The question I have is what is the second whole for on Verslagen mod for? |
Title: Re: cam chain tensioner mod Post by Oldfeller on 03/14/13 at 08:29:07 For when you eventually put on a new cam chain and need the original hole position. |
Title: Re: cam chain tensioner mod Post by Bubba on 03/14/13 at 10:29:05 Or...you change it out before you're close to losing the plunger (my bro's bike) and when it starts rattling you move it to the second hole... |
Title: Re: cam chain tensioner mod Post by Cavi Mike on 03/14/13 at 12:30:20 The "second" hole is the first hole. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |