SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Inner surface of Front Foot Peg /cgi-bin/YaBB.pl?num=1361156934 Message started by zwiggybo on 02/17/13 at 19:08:46

Title: Inner surface of Front Foot Peg Post by zwiggybo on 02/17/13 at 19:08:46 I just removed my front footpeg so I could get a handle on exactly what shape I need for a replacement front footpeg. The below picture is from the side (and slightly below in order to see the bottom surface) of the Left (kickstand) peg. This demonstrates to me ***and please correct me if I'm wrong*** The 'spring' and bottom 'flat stop' of the peg, do not act so much to stop the peg from moving down, but work in tandem to push the peg up a bit adding cusion. Any standard peg will pretty much work with modification of the hole, or allen screw; and a couple washers in place of the spring.

Title: Re: Inner surface of Front Foot Peg Post by zwiggybo on 02/17/13 at 20:24:38 ...and a picture of the pegspring, peg, and allen screw.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.