SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> What is the concensus on the headlight rattle
/cgi-bin/YaBB.pl?num=1360349669

Message started by Dooley on 02/08/13 at 10:54:28

Title: What is the concensus on the headlight rattle
Post by Dooley on 02/08/13 at 10:54:28

I have a real bad buzz in my head light. I have read a few different fix's people have done to fix it from foam tape, gasket sealer and electrical tape.

What is the consensus on what is the best fix?

Title: Re: What is the concensus on the headlight rattle
Post by Serowbot on 02/08/13 at 11:04:10

I don't think there is a consensus,...
...that's why there's so many different things used... ;D..
Basically, you just want to fill the gap in the hooky claw at the top... duct tape, whatever...

Title: Re: What is the concensus on the headlight rattle
Post by Dooley on 02/08/13 at 11:17:42

6E786F726A7F72691D0 wrote:

I don't think there is a consensus,...
...that's why there's so many different things used... ;D..
Basically, you just want to fill the gap in the hooky claw at the top... duct tape, whatever...

What is the "hook claw"? I read references to it but I do not recall seeing a picture pointing it out. I even looked at the parts guide and was not to sure what was meant by it. Is it something I will know it when I see it?

Thanks
Dooley

Title: Re: What is the concensus on the headlight rattle
Post by Serowbot on 02/08/13 at 11:38:21

3325322F37222F34400 wrote:

Remove screws at 7 and 4,... on the bucket... then turn the ring 10 degrees, to release the tongue at 12 o'clock(tongue/claw/lip)...
Lens and bezel ring will pop out...
Screws on the bezel, are for aiming...

http://suzukisavage.com/yabb2.2/Attachments/Removing_Headlight_Screws.png

Title: Re: What is the concensus on the headlight rattle
Post by Dooley on 02/08/13 at 11:46:42

7A6C7B667E6B667D090 wrote:

[quote author=3325322F37222F34400 link=1359696633/0#1 date=1359702467]Remove screws at 7 and 4,... on the bucket... then turn the ring 10 degrees, to release the tongue at 12 o'clock(tongue/claw/lip)...
Lens and bezel ring will pop out...
Screws on the bezel, are for aiming...

http://suzukisavage.com/yabb2.2/Attachments/Removing_Headlight_Screws.png
[/quote]

Thanks again I am sure it will come together when I see it.