SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> engine mount rod /cgi-bin/YaBB.pl?num=1359975725 Message started by Jockesavage on 02/04/13 at 03:02:05 |
Title: engine mount rod Post by Jockesavage on 02/04/13 at 03:02:05 whats the diameter and lenght on the rods holding the foot controls and engine? |
Title: Re: engine mount rod Post by Digger on 02/04/13 at 18:45:08 If you're talking about the lower-front motor mount bolt area, that hollow "rod" is 0.64" OD (plus or minus 0.05") and about 11 7/16" long (plus or minus 1/8"), with the length being measured between the inboard edges of the thick chrome foot peg brackets. As measured on mine (see signature block). IHTH! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |