SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Risers
/cgi-bin/YaBB.pl?num=1359656495

Message started by joellaeddie02 on 01/31/13 at 10:21:34

Title: Risers
Post by joellaeddie02 on 01/31/13 at 10:21:34

Can anyone suggest any where I can get some risers for my savage, preferably ones which dont require modding to fit. I'm looking for 3" or 4" risers. I'm in England where aftermarket Savage parts are rare so some links to quality suppliers would be much appreciated.

Title: Re: Risers
Post by WD on 01/31/13 at 13:40:09

Straight or pull back risers? Drag or pullback handlebars? Either way, you can get risers for Harley Davidson bikes that will work. Just buy ones that don't have a connected top cap, the spacing is wrong, you would have to drill new mounting holes in the top fork clamp. With non-bridged HD risers, at most, you might have to redrill the factory Suzuki riser mount holes to 13mm diameter.

Other good choices are take off parts from Yamaha or Honda v twin cruisers. Older Suzuki Maruaders had decent risers, as did Kawasaki VN800s. Surely there are bike breakers in the UK with websites...

Title: Re: Risers
Post by arteacher on 01/31/13 at 15:06:17

Any riser that takes a 10mm bolt will do. That way you don't have to modify your top tree.