SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ignition timing
/cgi-bin/YaBB.pl?num=1358017124

Message started by Demin on 01/12/13 at 10:58:44

Title: Ignition timing
Post by Demin on 01/12/13 at 10:58:44

Is there away to change the ignition timing at all?I looked through the manual and on here,just haven't found anything or I just missed it.

I have an '87 that I put an '02 engine in.I put the '87 flywheel in the '02 engine.It seems like maybe the ignition is too far advanced.It's hard to crank.Then when it does start on shutdown I'm getting alot of kickback.

Title: Re: Ignition timing
Post by verslagen1 on 01/12/13 at 12:02:17

you got to use the 02 flywheel with the 02 cdi

and vise versa.

Title: Re: Ignition timing
Post by Demin on 01/12/13 at 12:18:35

I thought I read if you use the '87 flywheel and the CDI it waqs good. ::)

Still has the '87 wiring harness.

Title: Re: Ignition timing
Post by Demin on 01/15/13 at 05:09:45

I guess I'll pull the cover and see if I can slot the holes where the pickup bolts in. :(