SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> DIY integratd tail/brake/turns- completed!
/cgi-bin/YaBB.pl?num=1357238012

Message started by diamond jim on 01/03/13 at 10:33:31

Title: DIY integratd tail/brake/turns- completed!
Post by diamond jim on 01/03/13 at 10:33:31

I'm starting a new integrated LED tail/brake/turn signals project for my meanie. Although our bikes are different the parts and methods are all the same. If there's interest on the forum for a write up then I'll start a thread with steps and updates. The S40 may or may not be a good candidate for such a mod. Not sure. So if no interest, no problem.

Title: Re: DIY tail/brake/turns combo
Post by verslagen1 on 01/03/13 at 11:22:02

your projects are always welcome, it may not be repeated, but the knowledge used for sure.

Title: Re: DIY tail/brake/turns combo
Post by sbrice54 on 01/03/13 at 14:45:14

Bring it on!!!

Title: Re: DIY tail/brake/turns combo
Post by diamond jim on 01/03/13 at 21:35:24

Will do then.

How ya like my redneck workstation thrown together from whatever I had laying around in the garage?

http://i255.photobucket.com/albums/hh128/russ_diamond_jim/photo_zps6b47fc87.jpg

It's got 120 switched for soldering iron and work light, 12V constant, 12V swtiched, soldering station, beadboard and ESD grounding strap with 1 mega ohm resistor. Cost- $0.

As I finish working out the circuit details I'll start a fresh how-to thread with pics of parts and processes.

Title: Re: DIY tail/brake/turns combo
Post by MiCTLaN on 01/04/13 at 06:27:04

That's a pretty sexy setup, count me among the jealous.

Title: Re: DIY tail/brake/turns combo
Post by Pine on 01/04/13 at 06:55:26

Wow thats Awesome! Hmm wel if your gonna get THAT fancy... I expect you to work and arduino in the project!!

Title: DIY int tail light
Post by diamond jim on 01/05/13 at 13:28:15

Almost done..

Title: Re: DIY tail/brake/turns combo
Post by diamond jim on 01/10/13 at 20:06:43

I got my DIY integrated tail light completed. Here's a vid.

http://s255.beta.photobucket.com/user/russ_diamond_jim/media/completedintegratedtaillight04MeanStreak1600_zpscfdc1f6d.mp4.html

In the next couple of weeks I'll put together a how-to thread.