SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Savage teardown
/cgi-bin/YaBB.pl?num=1356015914

Message started by Super Thumper on 12/20/12 at 07:05:13

Title: Savage teardown
Post by Super Thumper on 12/20/12 at 07:05:13

2001 LS650....Have my bike torn down for a performance rebuild and a new paint job.

Title: Re: Savage teardown
Post by Dave S. on 12/20/12 at 07:33:53

Great shop! Quite the project, hope you keep us up with your progress!

Title: Re: Savage teardown
Post by Super Thumper on 12/20/12 at 07:39:28

I am going to post pics, feedback on the mods to engine and seat, controls, etc. while this rebuild is going on. For those of you contemplating a top end rebuild I am going with a 95mm overbore, stock is 94mm. getting my big bore kit from Lancer's performance parts here on Suzukisavage.com.....go to the marketplace...his link is near the top!

Title: my workshop
Post by Super Thumper on 12/20/12 at 07:47:50

Here is a pic of my newly remodeled shop, finished at the end of October. Unrecognizable from the earlier pic!

Title: Re: Savage teardown
Post by paulmarshall on 12/23/12 at 14:18:06

What a awesome set up dude.

Title: Re: Savage teardown
Post by Super Thumper on 12/23/12 at 19:34:00

Thanks....we love it too....that floor is so clean you could eat off it!! makes it so much easier to find that small screw or part when it hits the floor and rolls around which is the main reason we painted it.