SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Ryca Build - Day 1 - Fork Lowering /cgi-bin/YaBB.pl?num=1355694972 Message started by Holly on 12/16/12 at 13:56:12 |
Title: Ryca Build - Day 1 - Fork Lowering Post by Holly on 12/16/12 at 13:56:12 I'm pleased to report success with the fork lowering mod! Between the build guide and video I had no problems removing the front wheel and forks, adding the spaces then re-installing. Made some of the frame cuts yesterday. I'll probably tinker all week then tackle re-installing the swingarm and rear tire next weekend. I don't expect the whole project to go this smoothly, but a successful first "serious" day of work is a nice confidence booster! :) |
Title: Re: Ryca Build - Day 1 - Fork Lowering Post by Gyrobob on 12/16/12 at 17:55:59 Congrats!! Getting started on making the changes, the cuts, etc., is a really big first step. |
Title: Re: Ryca Build - Day 1 - Fork Lowering Post by ZAR on 12/16/12 at 19:11:14 Good going Holly! To quote an old R&R song from my era(Cat Stevens/Rod Stewart) "The first cut is the deepest" and the hardest one to make. Getting into it and tearing things down is easy but I have to work myself up to take that first step. You're well on your way! Enjoy! |
Title: Re: Ryca Build - Day 1 - Fork Lowering Post by v-pilot on 12/16/12 at 22:16:00 You go Girl!!! I'll watch your build. I'm doing one in all Aluminum. Still far from assembly...still polishin' bits and fabin' other parts |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |