SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Fitted Custom rear gaurd /cgi-bin/YaBB.pl?num=1353549443 Message started by paulmarshall on 11/21/12 at 17:57:08 |
Title: Fitted Custom rear gaurd Post by paulmarshall on 11/21/12 at 17:57:08 Finally fitted rear gaurd. |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/21/12 at 17:58:15 Finally fitted rear gaurd. another angle |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/21/12 at 17:59:27 Finally fitted rear gaurd.another angle |
Title: Re: Fitted Custom rear gaurd Post by J C Stokes on 11/21/12 at 18:07:50 It is a credit to you Paul, hope it gives many miles of pleasure. |
Title: Re: Fitted Custom rear gaurd Post by justin_o_guy2 on 11/21/12 at 19:01:47 Someone came up with a very effective mudguard for the trailing edge of the front fender. On that bike, I think Id want one, Fine job on everything,, |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/21/12 at 19:10:51 Yes I would like to extend the front fender to prevent road tar and dirt flying up onto the engine. 4D5254534E4978487840525E15270 wrote:
|
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/21/12 at 19:12:45 I had 2 little tags welded onto the swing arm to mount the rear fender braces. |
Title: Re: Fitted Custom rear gaurd Post by v-pilot on 11/21/12 at 19:19:24 ...it just keeps gettin better :) |
Title: Re: Fitted Custom rear gaurd Post by justin_o_guy2 on 11/21/12 at 19:42:17 I could see a fender about 4" shorter in front & wrapping low on that tire, |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/23/12 at 23:03:13 7F6066617C7B4A7A4A72606C27150 wrote:
The front or the rear fender Justin? |
Title: Re: Fitted Custom rear gaurd Post by J C Stokes on 11/23/12 at 23:58:42 Wouldn't want the front guard tampered with Paul, but what about cow nuts? Then again Wairarapa isn't renowned for dairying and sheep nuts isn't so sloppy on the roads. |
Title: Re: Fitted Custom rear gaurd Post by J C Stokes on 11/24/12 at 00:00:03 Paul, the post self edited, for nuts read sh#t. |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/24/12 at 00:00:50 Plenty of sheep down here. ;D |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/24/12 at 00:05:38 New Zealanders can as of October 1 2012 ride a Savage with a learners licence. :o |
Title: Re: Fitted Custom rear gaurd Post by paulmarshall on 11/24/12 at 00:07:13 I might start a new post about this. |
Title: Re: Fitted Custom rear gaurd Post by justin_o_guy2 on 11/24/12 at 06:40:53 Front,, to get low protection for that frame & engine. Im not sure it would be a bit more work to build from scratch what I see in my head. Im thinking it would be just too hard to modify the existing fender, But then,, I know I dont have what it takes to shape a fender out. IDK,, I guess if I had a mig Id look at a piece of the heaviest walled exhaust pipe I could find & have a piece bent in a long radius to fit the tire, split it & open it up. 2.5 " pipe opened up would make almost 8" of fender. Thats plenty of metal to find a shape in.. MIte have to have some flat sheet to add to it for supports & maybe fill part of the radius, but I think I could build a fender from that . |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |