SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Re: HOWTO: Head Plug Cap / Seal (step-by-step) /cgi-bin/YaBB.pl?num=1352819511 Message started by thabrock on 11/13/12 at 07:11:50

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by thabrock on 11/13/12 at 07:11:50 Did this fix the leak for a long period of time?

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by verslagen1 on 11/13/12 at 07:13:55 7D61686B7B666A62090 wrote: Did this fix the leak for a long period of time? Depends on how good a job you did.

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by thabrock on 11/13/12 at 10:23:48 I was looking for a helpful response from the author.   Are you bored?

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by verslagen1 on 11/13/12 at 10:31:43 We've all done this repair, I've done it a few times. having 2 bikes and assisting on many more. Do you think the PO has info that we don't? If you wish an answer only from him, you'll have to address him specifically.

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by justin_o_guy2 on 11/13/12 at 21:10:29 The procedure, followed properly, solves the problem for nearly everyone who does it. I have seen exactly One who had the problem come back. There was some question about the design of the plug he got, IIRC. Fail to get the sealer between clean surfaces? Its coming back,

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by Serowbot on 11/13/12 at 21:27:03 Yes... :-?...

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by thabrock on 11/18/12 at 15:16:20 283B2C2D323F393B306F5E0 wrote: We've all done this repair, I've done it a few times. having 2 bikes and assisting on many more. Do you think the PO has info that we don't? If you wish an answer only from him, you'll have to address him specifically. Oh I get it, to get a helpful response I have to address the author.   I will have to remember that.  Thanks for the help!   ;D I was hoping to get a useful response and did not expect a "depends on how good a job you do".   This was one of my firsts posts on this site and wasn't expecting a ridiculous answer like that. OF COURSE it depends on good a job you do.  Im a grown man, Im not plugging the hole with chewing gum crossing my fingers here.

Title: Re: HOWTO: Head Plug Cap / Seal (step-by-step) Post by Serowbot on 11/18/12 at 15:28:06 35292023332E222A410 wrote: I was hoping to get a useful response and did not expect a "depends on how good a job you do".   This was one of my firsts posts on this site and wasn't expecting a ridiculous answer like that. OF COURSE it depends on good a job you do.  Im a grown man, Im not plugging the hole with chewing gum crossing my fingers here.   Lighten up...   We deal with all sorts here... chewing gum, would not be out of the question... ;D... If you think that was a ridiculous answer,.. consider the question... Would we all be doing this repair if it didn't work?... :-?... Would we post a "How to" in the Tech section?... Now,.. get to it!... and welcome to the site... If you're hanging around,.. expect some joking and ribbing... We're here for fun... we're not paid servants... ;)...

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.