SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> sidecover swap 02 - 86  help /cgi-bin/YaBB.pl?num=1348956382 Message started by swing69 on 09/29/12 at 15:06:22

Title: sidecover swap 02 - 86  help Post by swing69 on 09/29/12 at 15:06:22 The sidecovers on my running 1986 bike are heavily corroded.  I have a good set of case covers on my 2002 parts engine. Right side:  is it a direct swap? Left side:  can I leave the 02 stator and sensor on the 02 cover and install it on the 86?  Or do I have to move the 86 stator and sensor to the 02 cover before install. One other question:  the idler gear and a thin washer fell off during removal.  does the washer go under the gear against the cover???? thanks?

Title: Re: sidecover swap 02 - 86  help Post by verslagen1 on 09/29/12 at 15:11:17 Yes they'll swap, use the torque limiter from the 'o2 on the '86. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1288911670 the washers go on either side of the torque limiter gear.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.