SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Cone filter
/cgi-bin/YaBB.pl?num=1347926045

Message started by TROX on 09/17/12 at 16:54:05

Title: Cone filter
Post by TROX on 09/17/12 at 16:54:05

I am going to be re-jetting soon and I want to switch to a cone filter while I have everything apart. Can anyone recommend a good filter ?

Title: Re: Cone filter
Post by Greg on 09/17/12 at 17:03:30

Just because I'm feeling snarky...

http://bit.ly/OyOZgO

Title: Re: Cone filter
Post by TROX on 09/17/12 at 17:27:48

LOL, TY ::)

Title: Re: Cone filter
Post by TROX on 09/17/12 at 17:31:22

But what size is that smaller filter for the breather hose, I plan on removing the air box ?

Title: Re: Cone filter
Post by Greg on 09/17/12 at 17:37:01

http://bit.ly/UghRwT ;D

Title: Re: Cone filter
Post by TROX on 09/17/12 at 17:59:41

What is this Google site ? I might have to try that out. :o

Title: Re: Cone filter
Post by Paraquat on 09/17/12 at 18:22:24

For the breather I used a small K&N with a 3/8 barb sticking out. I had to order it through Autozone.com

http://www.autozone.com/autozone/accessories/K-N-2-in-o-d-x-1-5-in-chrome-top-and-steel-base-crankcase-vent-filter-with-375-in-o-d-flange/_/N-25xh?itemIdentifier=92524_0_0_

I ordered it with that screw on top so I could secure it somewhere.

--Steve

Title: Re: Cone filter
Post by TROX on 09/17/12 at 18:32:03

Nice, thanks Paraquat.

Title: Re: Cone filter
Post by tomw on 10/05/12 at 18:27:15

K&N # RC-2340 this is one of the shortes one that I,ve found and it will clear gas tank frame mount plus lowered seat pan on frame, you will have to rejet with this one

Title: Re: Cone filter
Post by Gyrobob on 10/05/12 at 19:07:19

Here's how I handled the air filter and legal breather system on the Double RYCA build. Putting a small filter on the end of a tube, venting the crankcase fumes overboard will get you a ticky-pie-ticky-poo in the metro Atlanta area.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304722902/130

It starts around reply #130.

Title: Re: Cone filter
Post by Cavi Mike on 10/05/12 at 22:27:33

I really like your breather idea. I asked about it in your build thread.

Title: Re: Cone filter
Post by Gyrobob on 10/06/12 at 03:51:07

1C3E29361236343A5F0 wrote:

I really like your breather idea. I asked about it in your build thread.

Thanks. It appears to be working well. I have a couple hundred miles on the thing, now, and it is still in place, no leaks, no difficulties I know of.