SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Need some info on bolt holes. /cgi-bin/YaBB.pl?num=1347749006 Message started by ksthumper on 09/15/12 at 15:43:26 |
Title: Need some info on bolt holes. Post by ksthumper on 09/15/12 at 15:43:26 What size tap do I need to finish the threads on the rear fender frame holes? Is it a tube that was welded in or can I drill it out and retap at a larger size? I need a bolt to stick out so I can attatch my solo seat to it. Thanks! |
Title: Re: Need some info on bolt holes. Post by Cavi Mike on 09/15/12 at 19:14:08 It's M8x1.25 I did it on mine. These holes, right? http://cavimike.com/savageCDI01.JPG |
Title: Re: Need some info on bolt holes. Post by ksthumper on 09/16/12 at 08:58:12 Ah ha! Perfect ty! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |