SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> eBay gasket set /cgi-bin/YaBB.pl?num=1346950852 Message started by BuckRYCA on 09/06/12 at 10:00:51 |
Title: eBay gasket set Post by BuckRYCA on 09/06/12 at 10:00:51 I purchased a gasket set on eBay. [ch9671] 86-98 SUZUKI LS650 ENGINE GASKET SET NEW CI-3049M Item number:160821834249 Price:$33.50 Today during an engine rebuild of a 1996 Savage I discovered that the cylinder head gasket did not fit as it was missing two stud holes. I have an order into RonAyers.com to get an OEM one. |
Title: Re: eBay gasket set Post by arteacher on 09/06/12 at 10:28:15 Why not just punch the needed holes in? |
Title: Re: eBay gasket set Post by ZAR on 09/06/12 at 10:55:26 6C67676E626D6C7677030 wrote:
Yep! heck back in the dark ages we just made our own gaskets.....of course back then it didn't really matter.....ALL bikes leaked oil anyways.....at least after you put oil in them!!!! |
Title: Re: eBay gasket set Post by justin_o_guy2 on 09/06/12 at 14:08:00 Seems like puttin holes in would be Sooo much easier than takin them out.. Is it a copper clad, paper gasket? I know Id rather spend a few bucks than risk having to go back in,, How much $$$ at Ayers? |
Title: Re: eBay gasket set Post by BuckRYCA on 09/06/12 at 14:27:44 It's a three part metal gasket, riveted together. It goes between the top of the cylinder and bottom of the cylinder head. Holds combustion pressure. It's not a paper gasket. Clymers says to replace it with a new one. I tried drilling in the missing holes. Wrecked it. Time for an OEM gasket (about $35 delivered). My point is don't buy this gasket kit if you expect the cylinder head gasket to fit. |
Title: Re: eBay gasket set Post by justin_o_guy2 on 09/06/12 at 16:22:56 I tried drilling in the missing holes. Wrecked it. I couldnt imagine someone like you not at least trying,, Bummer about that & thanks for the heads up. |
Title: Re: eBay gasket set Post by wambr on 09/06/12 at 22:46:13 I purchased this "Suzuki LS650P 86-91,95-04 Complete Gasket Set *3049* "set of gaskets. so far i tried to install gasket cover of the adjustment valve. the impression is not very good. but all the same the most important washer-head of the cylinder. what can you say guys? thanks! |
Title: Re: eBay gasket set Post by Dave on 09/07/12 at 08:52:52 4572646C4F4A4444070 wrote:
I am guessing tghe drill bit caught the thin sheets of copper and grabbed and tore things up. When drilling thin stuff - sandwich it between some sturdier material and drilll through everything. Using some scraps of plexiglass or Lexan works.....and because it is clear you can see where you are drilling. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |