SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Stock riser bar allen screw size
/cgi-bin/YaBB.pl?num=1346723490

Message started by TROX on 09/03/12 at 18:51:30

Title: Stock riser bar allen screw size
Post by TROX on 09/03/12 at 18:51:30

Anyone know what size the stock top plate handlebar allen screw size is on a 2005 S40 ? My handlebars are loose and it's not the top allen screws, it's the one's I believe are located below the handlebars and all I have is standard allen heads which won't fit. I am going by harbor freight tomorrow to get a set, but I want to make sure I get the right size. I looked in the Clymer manual, but couldn't find a size. Thanks for any help.

Title: Re: Stock riser bar allen screw size
Post by justin_o_guy2 on 09/03/12 at 23:34:43

You get a set & it'll be in there,,

Title: Re: Stock riser bar allen screw size
Post by Paraquat on 09/04/12 at 06:11:04

Get a metric set.

--Steve