SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Carburator help /cgi-bin/YaBB.pl?num=1345590761 Message started by Kasper412 on 08/21/12 at 16:12:41

Title: Carburator help Post by Kasper412 on 08/21/12 at 16:12:41 HELP! I have a LS650, i was doing a carburator jet mod and when i disassembled the upper carb (vacuum side) i didn't notice how the brass bracket was screwed in in the bottom of the gasket, should the holes be normally open or closed, you can orient the brass disc either way.

Title: Re: Carburator help Post by arteacher on 08/21/12 at 16:23:13 Open.

Title: Re: Carburator help Post by Kasper412 on 08/21/12 at 16:31:41 Thank you very much!

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.