SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Seat Removal question..... /cgi-bin/YaBB.pl?num=1345183483 Message started by Blue04Savage on 08/16/12 at 23:04:42

Title: Seat Removal question..... Post by Blue04Savage on 08/16/12 at 23:04:42 Hello all, I was just wondering how easy it is to remove the front seat on a savage?  I want to put some spacers in to lift the front of the seat, and from what I can see there are two bolts in front, and then one on each side that you would have to undo to remove the seat.  Is this correct?  Is there anything connected to the seat that needs to be undone?  Or anything i'm missing here? Thanks.

Title: Re: Seat Removal question..... Post by rfw2003 on 08/16/12 at 23:12:50 If you have the 2 piece seat then it's just 2 bolts one on either side and then it will lift up from the rear and slightly slide to the rear of the bike and it will come right off. 1 piece seat also has a 3rd bolt on the rear seat area that secures it to the fender.  Other then that it comes off the same way. The Front 2 bolts I think you are referring to are the Tank bolts that also hold the tab that the front of the seat slots into. If you head on over to the Tech section then look in the index thread you should easily find links on how-to's for doing the seat lift mod. R.F.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.