SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Supertrapp on 2011 /cgi-bin/YaBB.pl?num=1343670457 Message started by Foxman276 on 07/30/12 at 10:47:37 |
Title: Supertrapp on 2011 Post by Foxman276 on 07/30/12 at 10:47:37 The supertrapp claims to fit model years 86-03. Will it fit later models? I have a 2011. I will ask their customer service peeps, but I suspect they won't guarantee the fit, even if there has been no change to the mounting/config. Thanks! |
Title: Re: Supertrapp on 2011 Post by Serowbot on 07/30/12 at 11:20:19 Yup,.. they're all the same... |
Title: Re: Supertrapp on 2011 Post by Dutchmen on 07/31/12 at 08:12:34 Consider a Jardene it fits a 2012. |
Title: Re: Supertrapp on 2011 Post by Foxman276 on 07/31/12 at 09:54:43 Thanks, but Jardine is too loud for my taste. |
Title: Re: Supertrapp on 2011 Post by Foxman276 on 08/18/12 at 19:10:18 One more query on the Supertrapp. Does the kit include a heat shield to cover the join? If not, does anyone use an aftermarket shield? 1 3/4" or 2"? |
Title: Re: Supertrapp on 2011 Post by justin_o_guy2 on 08/18/12 at 20:21:33 If youll go ahead & get the pack of extra disks youll save $$$ on freight.. |
Title: Re: Supertrapp on 2011 Post by verslagen1 on 08/20/12 at 11:55:03 240D1A0F030C505554620 wrote:
6 to 9" shield works fine, haven't seen them advertizied as 1.75 or 2" though. |
Title: Re: Supertrapp on 2011 Post by Dave on 08/20/12 at 12:27:21 534C4A4D50576656665E4C400B390 wrote:
The SuperTrapp comes with 8 discs. Isn't that enough? My bike came with the SuperTrapp already installed....and it sounds pretty loud with the current 8 discs. Not sure I would want it too much louder. |
Title: Re: Supertrapp on 2011 Post by verslagen1 on 08/20/12 at 12:36:19 6-8 discs are good for stock jetting. bigger jets will perform better with more discs. |
Title: Re: Supertrapp on 2011 Post by Foxman276 on 08/20/12 at 13:30:55 564552534C4147454E11200 wrote:
6 to 9" shield works fine, haven't seen them advertizied as 1.75 or 2" though.[/quote] Sorry I wasn't clear - I meant 1 3/4" or 2" DIAMETER shield. Thanks. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |