SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Halvors project
/cgi-bin/YaBB.pl?num=1343497382

Message started by Halvor on 07/28/12 at 10:42:54

Title: Halvors project
Post by Halvor on 07/28/12 at 10:42:54

Hello, heres some photoes of my LS.

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 10:47:30

Title: Re: Halvors project
Post by arteacher on 07/28/12 at 10:47:53

Hello- is there a question here that I missed? ;)

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 10:47:53

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 10:48:15

Title: Re: Halvors project
Post by Serowbot on 07/28/12 at 10:54:23

Nice... especially like that seat... ;)...

Title: Re: Halvors project
Post by wambr on 07/28/12 at 10:54:55

very nice turned out. the driver's seat of this "Hello from Russia?" ;) although it is harmoniously integrated into the overall style of the motorcycle.

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 11:26:45

thanks. I like the rough rubber style of the Ural seat. It was easy to fit to. I made a bracket to fix it to the tank mount.

Ural-LS?

Lancer: the rear fender is a gl 1000 fender (1977)

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 11:55:00

525959505C535248493D0 wrote:

Hello- is there a question here that I missed? ;)

Yes/ no- Its a following up of the "projects" string.

Title: Re: Halvors project
Post by teabowl13 on 07/28/12 at 13:38:03

173E3329302D5F0 wrote:

...the rear fender is a gl 1000 fender (1977)

HA! HA! I had a feeling the ribbing on that fender looked familiar....
I'm using the same fender on my Would-be Roadster project!!

That looks Great! Nice work, sir!

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 14:05:13

I chopped of the donald duck end of the fender, and drilled 2 holes in the swing arm and fixed it with 2 long M6 bolts. I used the support on the other end and fixed it in the swing arm with 2 m5 bolts.

I am not 100% satisfied becauce it is to narrow. I might make a new one later.
I might buy one from this shop

http://calleschopperdelar.jetshop.se/ramar-tillbehor/skarmar/bakskarmar-c-232-1.aspx

I will install the o2 Gauge integrated in the head light.

After that, I want to start a TR1 project.

Title: Re: Halvors project
Post by Halvor on 07/28/12 at 14:12:34

Heres a video with some Virago projects. http://www.youtube.com/watch?v=kqWJlYqZt4o

The TR1 (wich might be my next project) is a early chain driven virago. It is pig ugly original, but a easy base for big fun, like the LS :)