SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front Heat Shield Nuts /cgi-bin/YaBB.pl?num=1342899401 Message started by nooner on 07/21/12 at 12:36:40 |
Title: Front Heat Shield Nuts Post by nooner on 07/21/12 at 12:36:40 How do you get those nuts off? I just started the disassembly for the Verslavy mod and the heat shield nuts won't come off. After some initial loosening they just keep spinning. Thanks. |
Title: Re: Front Heat Shield Nuts Post by Serowbot on 07/21/12 at 12:39:32 Bolt goes across to the other side footpeg... put a wrench on it over there and come back to this side n' try again... Psst... watch don't loosen the sidestand altogether and drop the bike... ;D... |
Title: Re: Front Heat Shield Nuts Post by nooner on 07/21/12 at 12:54:35 3127302D35202D36420 wrote:
Thanks Serowbot. I tell ya...if Clymer's made the manual to include all the info and steps for the mechanically challenged like myself it would need to be at least 3X its current length... ;D |
Title: Re: Front Heat Shield Nuts Post by justin_o_guy2 on 07/21/12 at 12:58:18 & 10 times as many corrections. They intentionally cut it short to avoid the confusion, |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |