SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ryca rear set problem
/cgi-bin/YaBB.pl?num=1341969361

Message started by wombat on 07/10/12 at 18:14:31

Title: Ryca rear set problem
Post by wombat on 07/10/12 at 18:14:31

Ryca rear set problems

The right hand rear-set is giving me trouble when I use the foot brake pedal. Since the peg rotates with the pedal, the weight/drag of my right foot on the peg keeps the pedal from coming back smoothly and fully. The pedal comes back all the way when I’m off the bike and I try it with my hand, but not so when underway.

First: is it normal for the foot peg on a rear set to rotate when you move the pedal? Stock bikes don’t do this and I’m pretty sure high-end rear sets don’t either.

Second (and most importantly): How do I make the Ryca brake pedal work properly without lifting my foot (awkward and unsafe to do) each time I use the rear brake?


Title: Re: Ryca rear set problem
Post by bikertrash on 07/10/12 at 19:23:18

I had to fuss with mine a lot to get it adjusted--I eventually removed the spring where the linkage connects to the brake--This was mentioned in either the you-tube video or in the printed instructions I printed from the ryca website.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.