SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Link length for hard-tailing? /cgi-bin/YaBB.pl?num=1341513314 Message started by Cavi Mike on 07/05/12 at 11:35:14 |
Title: Link length for hard-tailing? Post by Cavi Mike on 07/05/12 at 11:35:14 I picked up some tubing and I'm about to head into work and make my links, finally, but I'm not sure how long I should make them. With about 1/4" of clearance between the frame and tire, I have a measurement of 8-1/2" center-to-center. What are your experiences on tire-expansion? Is 1/4" enough clearance? I want the tire to hug the frame close as possible to eliminate any gap. Gap is enemy #1. |
Title: Re: Link length for hard-tailing? Post by verslagen1 on 07/05/12 at 13:07:24 I know 3/4" is enough, half might be. |
Title: Re: Link length for hard-tailing? Post by Hotrodchriz on 07/05/12 at 21:54:55 I made mine about 8in(i think they are shorter), but then I am not using the stock rear fender, and modified my frame a bit too |
Title: Re: Link length for hard-tailing? Post by justin_o_guy2 on 07/05/12 at 22:22:18 enemy number ONE http://ts1.mm.bing.net/images/thumbnail.aspx?q=4696701981098620&id=b2269391997a05e0f773e55336e988c4 |
Title: Re: Link length for hard-tailing? Post by Cavi Mike on 07/06/12 at 01:07:45 Well we can't all have universal health and dental care. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |