SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Belt length?
/cgi-bin/YaBB.pl?num=1340474976

Message started by Drifter on 06/23/12 at 11:09:36

Title: Belt length?
Post by Drifter on 06/23/12 at 11:09:36

A couple of questions, what is the belt length and the diameter of the belt surface of each pully. One more how many teeth are on the the front and real pulleys?

Title: Re: Belt length?
Post by wambr on 06/23/12 at 11:36:17

the front pulley have 23 teeth and 68 theeth on rear. drive belt have 133 theeth about 14mm on each.
p.s soory for my english.

Title: Re: Belt length?
Post by justin_o_guy2 on 06/23/12 at 12:17:08

Y0ur English is MUCH better than my Russian,, Im embarrassed that I only speak English,. But, I tried Spanish & I just couldnt do it,
Just enough to get my face slapped or beat up..

Title: Re: Belt length?
Post by Drifter on 06/23/12 at 12:34:42

Thanks wambr!

The question was about pulleys not his russian. Go hijack another thread your good at that or join the military and grow some balls!

Title: Re: Belt length?
Post by bill67 on 06/23/12 at 12:41:34

Dum Da Dum Dum

Title: Re: Belt length?
Post by justin_o_guy2 on 06/23/12 at 12:44:31

17213A35273621530 wrote:

Thanks wambr!

The question was about pullies not his russian. Go hyjack another thread your good at that or join the military and grow some balls!

Dude, IDK what your problem is. Take your personal attack & get on your way,

Title: Re: Belt length?
Post by Drifter on 06/23/12 at 12:54:20

Wambr, does anyone in russia make different size pullies for this bike or adapted a pully from another bike?

Title: Re: Belt length?
Post by WD on 06/23/12 at 13:13:50

Don't know about the Russian aftermarket put I have seen KZ440 stuff adapted to the LS platform if it helps. One of the German Savage sites from several years ago.

You might want to get the specs for VN900 belt drive components...

Title: Re: Belt length?
Post by Drifter on 06/24/12 at 06:12:28

WD, the kz pully has 22 teeth the savage pully is 23 so its going in the wrong direction. I did not think of the 900 vulcan i will check it out. Thanks.

Do you know the belt length?

Title: Re: Belt length?
Post by wambr on 06/25/12 at 11:00:05

6F59424D5F4E592B0 wrote:

Wambr, does anyone in russia make different size pullies for this bike or adapted a pully from another bike?

No, I do not know about such alterations at savage.
but some guys in Russia make good custombikes.for example https://lh4.googleusercontent.com/-Cov6gBI4tTk/Tm7mXsyHC7I/AAAAAAAAApc/SW1DLpugMVo/s640/IMG_2681.jpg or http://foto.mail.ru/mail/andre_isaak/171/?page=2
p.s. so no need to tell me "Go hijack another thread your good at that or join the military and grow some balls! " ;)I have enough big balls. I even sometimes they ride :)
p.p.s. sorry for flood

Title: Re: Belt length?
Post by wambr on 06/25/12 at 11:06:12

I have a drive pulley on 25 teeth, but I think my motorcycle (ls400) has too much to lose in the dynamics of the acceleration, if I put it.

Title: Re: Belt length?
Post by Drifter on 06/25/12 at 12:32:36

Wambr, pm sent. Glad to see someone from Russia on here, thanks for the answers! Are there alot of Suzukis over there?

Title: Re: Belt length?
Post by wambr on 06/26/12 at 01:03:00

not so much [ch1089][ch1072][ch1074][ch1072][ch1078][ch1077][ch1081] in Russia on the Russian forum about 60 people. maybe more, Nov't know. in Samara I probably right at all. savage-quite a rare bike in Russia.