SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> How to Properly Measure for new Bars
/cgi-bin/YaBB.pl?num=1340455929

Message started by rfw2003 on 06/23/12 at 05:52:09

Title: How to Properly Measure for new Bars
Post by rfw2003 on 06/23/12 at 05:52:09

I was wondering what the best way would be to properly measure on my scoot for me to get a new set of bars. I'm thinking I could use some alittle taller, pulled back and maybe alittle wider, but as I stated I'm not sure how I would measure so I could order the best size from the get go.

R.F.

Title: Re: How to Properly Measure for new Bars
Post by justin_o_guy2 on 06/23/12 at 07:23:32

Get on it, close your eyes, put your arms out where you want them, open up & see, Measure to there.

Title: Re: How to Properly Measure for new Bars
Post by 360k+ on 06/23/12 at 07:55:11

Then using JOGs method, swing a leg over and sit side saddle on the seat. Again, hold your arms straight out, hands open, and kinda move them up and down curvy fashion. That will be the nice looking lady who will approach to compliment your bike when it's done.