SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> OIL LEAK!!!! /cgi-bin/YaBB.pl?num=1340323190 Message started by elitemunkeycrew on 06/21/12 at 16:59:50 |
Title: OIL LEAK!!!! Post by elitemunkeycrew on 06/21/12 at 16:59:50 So I took off the exhaust pipe and muffler earlier in the week and left it off while I was waiting for my exhaust wrap to arrive in the mail. The wrap arrived today and I went to the garage and on the floor was a good size oil spill. WTF!! :( Here is video to better explain the situation. http://www.youtube.com/watch?v=CMq9y6N12e4&feature=youtu.be Can anybody tell me what's going on? When I put the exhaust back on and tighten up the bolt will it seal up the leak? |
Title: Re: OIL LEAK!!!! Post by verslagen1 on 06/21/12 at 17:34:17 Not to worry, it's from your foot peg/engine mounting bolts. It comes from the engine center parting line, oil collects in the bolt thru hole. It'll go away once you replace the exhaust and torque them down. |
Title: Re: OIL LEAK!!!! Post by elitemunkeycrew on 06/21/12 at 17:56:15 verslagen1, THX Man :) Just so I'm tracking, even though I didn't loosen the foot peg side, when I loosen the bolt on the exhaust side if broke a seal? Man, do I got a lot to learn about this bike. |
Title: Re: OIL LEAK!!!! Post by verslagen1 on 06/21/12 at 18:07:15 No seal to break, soon as you loosen it, what ever trapped in there will come out. |
Title: Re: OIL LEAK!!!! Post by elitemunkeycrew on 06/21/12 at 18:20:33 Got it. I thought I was about to have to drop some serious cash to get something fixed. Man I love this site!!! |
Title: Re: OIL LEAK!!!! Post by justin_o_guy2 on 06/21/12 at 21:38:38 Dangitt Versy! Coulda had that monkey goin bananas with a little BS.. Ohh But Nooo,, gotta shoot straight & be nice,, Youre about no danged fun, you know that? |
Title: Re: OIL LEAK!!!! Post by thumperclone on 06/21/12 at 22:04:16 do the squat and balance & peek dance to insure oil level is good |
Title: Re: OIL LEAK!!!! Post by braveteacher on 06/24/12 at 17:13:52 what is the factory spec on torque for those motor bolts? |
Title: Re: OIL LEAK!!!! Post by verslagen1 on 06/24/12 at 17:20:55 http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1098848534 ITEM N-m | ft-lb Engine mounting No. 1 bolts and nuts 37.0 45.0 | 27.3 33.2 Engine mounting No. 2 bolt 70.0 88.0 | 51.6 64.9 Engine mounting No. 3 bolts and nuts 70.0 88.0 | 51.6 64.9 Engine mounting No. 4 bolt and nut 70.0 88.0 | 51.6 64.9 Engine mounting No. 5 Allen 20.0 30.0 | 14.7 22.1 I always use 50 ft lbs |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |