SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Bobber Project /cgi-bin/YaBB.pl?num=1340132151 Message started by elitemunkeycrew on 06/19/12 at 11:55:50 |
Title: Bobber Project Post by elitemunkeycrew on 06/19/12 at 11:55:50 I'm just starting out working on motorcycles so I'm here to learn. Any advice or video on how to remove the back tire? |
Title: Re: Bobber Project Post by babyhog on 06/19/12 at 12:35:17 A helper would be great! Its pretty straight forward, just be sure to keep track of where all the bushings come from and keep them on the correct side. They are not inter-changeable. Why do you need to remove it anyway? |
Title: Re: Bobber Project Post by splash07 on 06/19/12 at 13:31:31 you need a clymer or go here http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1138554254 |
Title: Re: Bobber Project Post by elitemunkeycrew on 06/19/12 at 14:57:04 7A797875776D140 wrote:
I want to change out my rear fender but I'm hesitant to work on bikes cause if something messes while I'm doing 50 MPH I'm in a world of hurt. :( |
Title: Re: Bobber Project Post by justin_o_guy2 on 06/19/12 at 19:23:49 Dude, you dont even Need an Elite monkey crew to do what you want to do, walk off in it. Dont be skeert, its not gonna fly apart when ya hit the gas, it aint no double A fueler,, Any ol monkey crew can work on this thing, |
Title: Re: Bobber Project Post by skeebo on 06/19/12 at 19:56:55 36292F2835320333033B29256E5C0 wrote:
...........never mind........ |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |