SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Electrical connectors? /cgi-bin/YaBB.pl?num=1340065113 Message started by Smokestack on 06/18/12 at 17:18:33 |
Title: Electrical connectors? Post by Smokestack on 06/18/12 at 17:18:33 So, I'm chasing down a couple gremlins in my rear turn signals, and was wondering if there was anything specific I need to know about the connectors on this bike. Can I just grab the closest looking ones from the auto parts store, or do I need to grab a specific rating? Anyone know? |
Title: Re: Electrical connectors? Post by 360k+ on 06/18/12 at 17:39:35 If you're talking about automotive spade type slip-on connectors, they're pretty generic, but the Savage also has all kinds of specialized connectors (waterproof, etc.). A good way to troubleshoot hot circuit items like turn sigs is a trouble light that clips to ground and has a pointy end for piercing insulation. Most automotive stores have them, or they can also be made at home fairly easily using an LED. |
Title: Re: Electrical connectors? Post by Serowbot on 06/18/12 at 23:51:29 5254474C0C0006070C350 wrote:
Mine uses an in-line glass fuse... God!,.. I so friggin' old... ... and it didn't take near as long as I thought... :-?... |
Title: Re: Electrical connectors? Post by justin_o_guy2 on 06/19/12 at 05:29:28 My trouble lite is an 1156 socket with wires soldered on, an aligator clip on one & a piece of dowel rod with a hard wire sharpened to a needle point on the other, |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |