SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Pipe size? /cgi-bin/YaBB.pl?num=1339125067 Message started by 360k+ on 06/07/12 at 20:11:01 |
Title: Pipe size? Post by 360k+ on 06/07/12 at 20:11:01 I just searched for "muffler" and read thru all the threads. I saw the following sizes listed 1 5/8, 1 3/4, and 2 inches. Does someone have a REAL definitive pipe size for fitting to a new muffler, or do I need to remove it and measure? |
Title: Re: Pipe size? Post by Greg on 06/07/12 at 20:13:37 7D7B6863232F2928231A0 wrote:
The definitive answer is none of the above. I believe it is metric. It is very close to 1 11/16OD of the header pipe. I used a 1 3/4ID muffler with a tin can spacer/gasket thing. |
Title: Re: Pipe size? Post by SuperSavage on 06/07/12 at 20:35:03 When I measured the end my header pipe for the install of a Dyna muffler, it was 1.68 inches with a digital caliper. The inside diameter of my Dyna muff was 1.75 inches. Good luck JohnnyCat |
Title: Re: Pipe size? Post by 360k+ on 06/07/12 at 20:36:22 OK, well 1 11/16 is between 1 5/8 and 1/3/4 so that gives me a real target anyway. |
Title: Re: Pipe size? Post by Greg on 06/08/12 at 04:51:05 4C696E68687F65677234363737060 wrote:
Which is 1 10.88/16" ::) |
Title: Re: Pipe size? Post by 360k+ on 06/08/12 at 06:52:21 Thanks for clearing things up, Greg :-/ |
Title: Re: Pipe size? Post by Paraquat on 06/08/12 at 08:20:39 I have a ton of math in my exhaust tubing size thread. --Steve |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |