SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> O-ring Oil-filter cover
/cgi-bin/YaBB.pl?num=1338892050

Message started by Danneman on 06/05/12 at 03:27:30

Title: O-ring Oil-filter cover
Post by Danneman on 06/05/12 at 03:27:30

Anyone who knows the dimensions (in milimeters) of the o-ring that seals the cover to the oil-filter I have a Savage -92..

Title: Re: O-ring Oil-filter cover
Post by justin_o_guy2 on 06/05/12 at 06:11:18

I never needed that to get another one. Make, model, location.

Title: Re: O-ring Oil-filter cover
Post by Danneman on 06/05/12 at 08:02:53

My old o-ring is deformated and i have no near Suzuki-reseller so i need the measure to buy one from a regular store.

Title: Re: O-ring Oil-filter cover
Post by justin_o_guy2 on 06/05/12 at 09:23:15

Walk into a hydraulic supply store with it in your hand, take the cover with you. Youll get it solved easily.

The local NUt & Bolt supply house usually has some Orings, but I doubt theyd have that size. A hydraulic valve & cylinder shop would,

Title: Re: O-ring Oil-filter cover
Post by Dave on 06/05/12 at 11:42:34

If you go onto any Suzuki website that sells parts.....you can look up the parts list and investigate.

The one I looked at indicates the O-ring is 2.4 diameter x ID 73. I guess that is in millimeters.

Here is the webstie I use - but you can use BikeBandit or any other site that sells OEM Suzuki Parts:

http://www.hondaofflorence.com/fiche_select1.asp?cat=Motorcycles&mfg=Suzuki

Title: Re: O-ring Oil-filter cover
Post by verslagen1 on 06/05/12 at 12:04:15

.095" x 2.875"

that's about right.