|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> mirror thread size /cgi-bin/YaBB.pl?num=1338684679 Message started by Greg on 06/02/12 at 17:51:19 |
|
Title: mirror thread size Post by Greg on 06/02/12 at 17:51:19 Does anyone know what thread size the LS650 uses? |
|
Title: Re: mirror thread size Post by Greg on 06/02/12 at 17:57:43 Well, Google says 10mm right hand thread for each mirror. Does that sound right? |
|
Title: Re: mirror thread size Post by arteacher on 06/02/12 at 18:00:13 Sound about right (and left) to me. |
|
Title: Re: mirror thread size Post by Greg on 06/02/12 at 18:02:23 4D46464F434C4D5756220 wrote:
:) |
|
Title: Re: mirror thread size Post by rfw2003 on 06/02/12 at 20:59:10 I just bought some low cost mirrors that had longer arms on them. The stock thread is indeed 10mm. R.F. |
|
Title: Re: mirror thread size Post by Greg on 06/03/12 at 08:04:15 5F4B5A1F1D1D1E2D0 wrote:
Thank you! |
|
Title: Re: mirror thread size Post by Wake51 on 06/03/12 at 20:27:18 I just bought a set of these babies. The stock ones just show me elbows with the drag bars I have. Helps to turn them vertical but the squares have to go anyway. Can't beat the price. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370382940257 |
|
Title: Re: mirror thread size Post by rfw2003 on 06/03/12 at 20:44:41 202522292E24470 wrote:
Thank you![/quote] Anytime. I may not know much about these great little bikes yet, but what I do learn and know I freely pass on so others will benefit from my trial and error. :D Now if I could just find a set of LED turn/run lights for the front and rear I like that don't cost a fortune I'd be happy. Then the next upgrade will be trying to figure out how to do a HID upgrade. |
|
Title: Re: mirror thread size Post by Greg on 06/04/12 at 05:08:53 586E646A3A3E0F0 wrote:
I was looking at some that are very similar! |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |