|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Rattle can question /cgi-bin/YaBB.pl?num=1338251280 Message started by Greg on 05/28/12 at 17:27:59 |
|
Title: Rattle can question Post by Greg on 05/28/12 at 17:27:59 I read Denise's tutorial for painting the tank with spray cans. (http://suzukisavage.com/cgi-bin/YaBB.pl?num=1338248877) I have a question. If I remove my tank badges, which have dear coat over them, can I spray clear coat to fill in where the stickers were? |
|
Title: Re: Rattle can question Post by Denise on 05/28/12 at 17:39:40 I take it you have the decals, It would be tough to get it filled in my opinion and would likely look pretty bad without lots of coats, lots of wet sanding with 800 to 1200 and then lots of buffing, I personally would rather paint a tank than tackle that hopefully someone who has done it can give some advice. "D" 2326212A2D27440 wrote:
|
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |