SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> How to get head cover off...
/cgi-bin/YaBB.pl?num=1338001633

Message started by heroicseven on 05/25/12 at 20:07:13

Title: How to get head cover off...
Post by heroicseven on 05/25/12 at 20:07:13

Ive got it loose, it just doesn't look like there is any way it is coming out. Any tips?

Title: Re: How to get head cover off...
Post by heroicseven on 05/25/12 at 20:26:36

In particular the L55 bolt is givin me the buisness

Title: Re: How to get head cover off...
Post by verslagen1 on 05/25/12 at 20:41:59

have you got all these bolts out?

http://www.hunt101.com/data/500/medium/bolts_in_pic.JPG

Title: Re: How to get head cover off...
Post by heroicseven on 05/25/12 at 21:17:39

Yup i did that with the cardboard too. I have a problem with a slim threaded bolt that sticks up in the middle of the head. I cant get the cover over that bolt. its the one that has the lock nut on it.

Title: Re: How to get head cover off...
Post by verslagen1 on 05/25/12 at 21:41:51

In place of L70?

must be some work around the PO did, that's not stock.

take the stud out, then you can take the cover off along with the stud.

Title: Re: How to get head cover off...
Post by heroicseven on 05/25/12 at 22:39:12

its in there too good to remove. I may just have to pull the whole engine. I'm already up to my eyeballs in this. The L 70 isnt like the others it was just a lock nut... now its just a stud sticking up, and It must be threaded into the motor but I cant/ dont know how to get it out.

Title: Re: How to get head cover off...
Post by justin_o_guy2 on 05/26/12 at 05:21:44

Got enough threads pokin up to double nut it?

Title: Re: How to get head cover off...
Post by heroicseven on 05/26/12 at 11:28:41

thread for days, ill give that a go. Thanks