SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Grip removal........ /cgi-bin/YaBB.pl?num=1337445861 Message started by Georgiadigger on 05/19/12 at 09:44:21 |
Title: Grip removal........ Post by Georgiadigger on 05/19/12 at 09:44:21 How do you remove the grips & caps from the handle bars? any help would be appreciated! |
Title: Re: Grip removal........ Post by arteacher on 05/19/12 at 10:05:22 Caps just pull off. Left grip: It is glued on. Push a screw driver between grip and handle bar and squirt some WD40 in there, then work it off. Right grip: Loosen throttle cable adjustment as loose as it will go. Remove two Allen bolts from back of switch block. It will open like a clam shell. Undo the cable end from the grip, and slide the grip off. Bob's yer uncle and your done. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |