SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Quick question about carb mixture screw
/cgi-bin/YaBB.pl?num=1337280693

Message started by Jacob on 05/17/12 at 11:51:32

Title: Quick question about carb mixture screw
Post by Jacob on 05/17/12 at 11:51:32

I have a 2012 Suzuki S40 650. I need to know the stock screw out turns? With it turned the whole way in, how many turns out is stock?

Thanks

Jacob

Title: Re: Quick question about carb mixture screw
Post by verslagen1 on 05/17/12 at 11:56:42

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1309246277

Title: Re: Quick question about carb mixture screw
Post by justin_o_guy2 on 05/17/12 at 16:54:23

Any time an adjustment like this needs made, the smarty pants move is close the screw & count the turns, then open back to where it was & make adjustments from there, you can always go home,.,

Title: Re: Quick question about carb mixture screw
Post by Greg on 05/17/12 at 16:57:13

392620273A3D0C3C0C34262A61530 wrote:

Any time an adjustment like this needs made, the smarty pants move is close the screw & count the turns, then open back to where it was & make adjustments from there, you can always go home,.,

That's what I did. Then I promptly forgot the magic number. :-[

Title: Re: Quick question about carb mixture screw
Post by justin_o_guy2 on 05/17/12 at 17:06:02

Well,, I shoulda finished th instructions, I figured people like us knew this part

write it down,,

Title: Re: Quick question about carb mixture screw
Post by Dave on 05/18/12 at 05:32:09

On any carb on any engine.....if I don't know where the screw used to be......I open it 1.5 turns and go from there. If turning the screw out to about 3 turns doesn't result in the engine idling too rich, then it is time to get a bigger jet.