SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Clymer manual /cgi-bin/YaBB.pl?num=1336544122 Message started by jcstokes on 05/08/12 at 23:15:22 |
Title: Clymer manual Post by jcstokes on 05/08/12 at 23:15:22 Does anyone know whether Clymers Savage/S40 manual which runs from about 1986-2007 would be suitable for a 2008 manufacture S40. A plate on my bike says it complies with some Canadian emision standard. I am in New Zealand. I am also wanting to fit a rev counter at a later date. JP Cycles have a variety but some must have an adaptor if you have a single fire ignition system. Can someone confirm that this bike does? |
Title: Re: Clymer manual Post by Oldfeller on 05/09/12 at 09:56:58 We have a dual fire system. Clymers has known errors in it -- see the tech section for the thread. A current edition should carry wiring diagrams for both old and new bikes. |
Title: Re: Clymer manual Post by jcstokes on 05/09/12 at 12:55:12 Thank you Oldfella |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |