|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Drilled baffle audio-both audio in first post /cgi-bin/YaBB.pl?num=1336256045 Message started by Greg on 05/05/12 at 15:14:02 |
|
Title: Drilled baffle audio-both audio in first post Post by Greg on 05/05/12 at 15:14:02 I drilled 4x 5/16" holes in the rear of my muffler. The sound is a little deeper than my recording. And it sounds great under a load! Here is a link to the audio: http://files.thebenics.com/4x5-16_holes.mp3 I have also attempted to upload a zip file with both audio files. |
|
Title: Re: Drilled baffle audio Post by 223fan on 05/05/12 at 17:32:56 Thanks for the audio.I am really thinking about doing this or getting a dyna muffler'just can't make up my mind. |
|
Title: Re: Drilled baffle audio Post by Greg on 05/05/12 at 17:49:06 6A6A6B3E3936580 wrote:
I figured I would do this and if I don't like it, then get the Dyna muffler. I will drill 4 more holes and grab some audio of that as well. |
|
Title: Re: Drilled baffle audio Post by bobed on 05/05/12 at 18:06:22 Did you rejet or could you tell a difference |
|
Title: Re: Drilled baffle audio Post by Greg on 05/05/12 at 18:24:25 696E6F686D6D6F696C5D0 wrote:
I did not rejet. My trouble spot of cruising 35-40mph in 5th gear and attempting to accelerate is gone. Bottom end feels the same. I don't smell gasoline any more. |
|
Title: Re: Drilled baffle audio Post by Greg on 05/09/12 at 08:39:24 This is the audio from 8 holes. It is a bit deeper than 4 holes. It seems to be about the same loudness and it runs the same as 4 holes. http://files.thebenics.com/8x5-16-holesholes.mp3 |
|
Title: Re: Drilled baffle audio-both audio in first post Post by Dave Sisk on 05/09/12 at 15:18:52 Cool...I like the 8 better than the 4. I found my larger drill and opened the 4 3/8" (or so) holes I made up to 1/2" each. It got deeper. This is kinda like tuning a subwoofer by adjusting the port size. 8-) Dave |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |