SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Cafe >> threadlocker /cgi-bin/YaBB.pl?num=1336083086 Message started by rl153 on 05/03/12 at 15:11:25 |
Title: threadlocker Post by rl153 on 05/03/12 at 15:11:25 Should you let threadlocker set up for a while or just apply it and thread the bolt in? Thanks. |
Title: Re: threadlocker Post by justin_o_guy2 on 05/03/12 at 15:12:41 You can put it on the threads & screw it together. If its Red,, dont. Get Blue. |
Title: Re: threadlocker Post by Serowbot on 05/03/12 at 16:46:12 JOG,,, I bet that made sense when you wrote it... :-?... PS... screw together while wet... When it drys, it's too late... |
Title: Re: threadlocker Post by 12Bravo on 05/03/12 at 18:55:14 Once set up/dried, the red requires heat or a big cheater pipe to break loose. The blue doesn't require heat to break loose. I recommend using blue on smaller bolts (6mm,1/4 or smaller) |
Title: Re: threadlocker Post by justin_o_guy2 on 05/03/12 at 23:18:49 5E485F425A4F42592D0 wrote:
Uh, yea,, as a matter of fact, it did,, now, not so much. I dont recommend the red locktite, get the blue stuff, Use the red & youll need a torch to get it loose. I sometimes tighten the nut on a bolt, then put one drop on the threads where the bolt comes thru the nut, Of course, thats not gonna work on a bolt screwed into something, Just a drop or 2 is all ya need, |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |