SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Cafe >> embed a picture
/cgi-bin/YaBB.pl?num=1335806294

Message started by justin_o_guy2 on 04/30/12 at 10:18:14

Title: embed a picture
Post by justin_o_guy2 on 04/30/12 at 10:18:14

How do you guys do that? I can do it on another forum,, but this one is different

Title: Re: embed a picture
Post by Paraquat on 05/05/12 at 05:06:25

I figured it was like. Any phpboard and used image tags.
It worked.
[...img] then your picture link here [/...img]
In this case though the [...img] is supposed to be img but inside the brackets and [/...img] above is supposed to be [/img]
If I had encapsulated " then your picture here" within the img and /img it would've thought "then your picture here" was a link to an image.
Make sense? Or did I make it worse?

--Steve

Title: Re: embed a picture
Post by justin_o_guy2 on 05/05/12 at 05:17:45

Someone told me how.. click the "picture" just above the underline
& plop the Location between the [img]s. For multiple pics, pop it again,,

I would like to be able to resize pics,, some of them are just HugeMongous.. Thats hyperbole for Big.,.

Title: Re: embed a picture
Post by Paraquat on 05/05/12 at 06:03:21

I used to resize them with photoshop but I lost my CD. Nowadays I use MSPaint.
Start>All Programs>Accessories>paint
Alternatively Start>run and type in "MSPaint"
In the tool bar is a drop down for "Image" then click on "Stretch and Skew".

--Steve

Title: Re: embed a picture
Post by Cavi Mike on 05/05/12 at 07:16:34

I can't remember if you can in Windows XP but on Windows 7 you can just right-click on the image file and select 'Edit' and it will open up in MSPaint automatically.