SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> My rat bike...
/cgi-bin/YaBB.pl?num=1335301803

Message started by Double-J-72 on 04/24/12 at 14:09:46

Title: My rat bike...
Post by Double-J-72 on 04/24/12 at 14:09:46

My "98" bobber/rat bike that is still a work in progress.

Title: Re: My rat bike...
Post by 223fan on 04/24/12 at 14:59:35

Looks good.I like those handle bars.

Title: Re: My rat bike...
Post by Double-J-72 on 04/24/12 at 15:37:48

thanx picked them up cheap at a Walnecks swap meet.

Title: Re: My rat bike...
Post by Scott McCrory on 04/24/12 at 16:01:32

I dig it!

Title: Re: My rat bike...
Post by Chopped on 04/24/12 at 16:35:25

Now this is a Rat Bike.... mine o mine!

http://i1057.photobucket.com/albums/t394/bullturpin/ChopChop.jpg

Title: Re: My rat bike...
Post by Double-J-72 on 04/24/12 at 18:11:27

I Sooooooooooooo... want a springer front end....jealous i am...

Title: Re: My rat bike...
Post by joeyzaza on 04/24/12 at 18:13:34

thats awesome!! I have a ton of questions... First im assuming thats a hand clutch and suicide shift? and most important Is that a voodoo short chop frame? Or what frame is that?

Title: Re: My rat bike...
Post by Chopped on 04/24/12 at 21:23:34

thats a 2002 Paughco Springer and a 2001 Paughco rigid frame set up for a harley 1200 Sporty... I fixed that! AND YES THATS A HAND SHIFT/CLUTCH ON THE SIDE! I am rebuilding the bike again (properly) Here is the link to what I am doing. It will be over the next several months or so.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1335074530/0#0

Title: Re: My rat bike...
Post by Chopped on 04/24/12 at 21:25:26

and I will say running a springer front end and a rigid frame with a lunger under power.... I have shattered the motor mounts at least 5 times... welds on top of welds to keep her going! I am going to fix all of that!

Title: Re: My rat bike...
Post by thumperclone on 04/24/12 at 21:28:26

needs an 8 ball on top of the shifter ;)

Title: Re: My rat bike...
Post by Chopped on 04/24/12 at 21:32:11

Im thinking of wiring the starter button into the tip of the handle when Im done!