SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> FRONT END
/cgi-bin/YaBB.pl?num=1334095370

Message started by ROB CYCLE on 04/10/12 at 15:02:49

Title: FRONT END
Post by ROB CYCLE on 04/10/12 at 15:02:49

DOES ANYONE KNOW THE STEM SIZE ON THE SAVAGE .

Title: Re: FRONT END
Post by arteacher on 04/10/12 at 16:01:10

What dimensions do you want to know?

Title: Re: FRONT END
Post by ROB CYCLE on 04/10/12 at 17:03:38

diameter and length

Title: Re: FRONT END
Post by spacepirates on 04/10/12 at 19:43:00

Don't know length. The other dimensions are:

ID OD Width
25 47 15 (upper)
30 55 17 (lower)

If you go to http://www.allballsracing.com/index.php/forkconvertion it'll show you all the models compatible (some with different bearing sizes) that will fit the stock neck.