SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Tightening the rear axle nut /cgi-bin/YaBB.pl?num=1332812346 Message started by built2last66 on 03/26/12 at 18:39:06 |
Title: Tightening the rear axle nut Post by built2last66 on 03/26/12 at 18:39:06 Is is better to do this with the bike on the jack or on the ground, or does it even matter? |
Title: Re: Tightening the rear axle nut Post by Serowbot on 03/26/12 at 18:41:11 Ground... snuggy on a lift, then crank it down on the ground.. |
Title: Re: Tightening the rear axle nut Post by built2last66 on 03/26/12 at 18:53:08 Thanks Serow.. the clymers says on the lift but I figured it was more in place torqued on the ground.. just got my chain conversion done and I'm trying to work out the kinks and get it smooth as possible.. I hadda grind off the belt gaurd brackets because my chain was eating into it going up and down hills aha |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |