SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Part No caliper seals /cgi-bin/YaBB.pl?num=1332279585 Message started by rusty_bike on 03/20/12 at 14:39:44 |
Title: Part No caliper seals Post by rusty_bike on 03/20/12 at 14:39:44 We have a 1991 Savage fitted with Nisin front brake caliper. The piston does not retract after brake pressure releases. I can see bits of rubber around the piston. Need new seal methinks. I can only get part number for a 1996 bike. Does anyone know if the calipers changed over the years? |
Title: Re: Part No caliper seals Post by Boofer on 03/20/12 at 15:13:59 Was the Savage even made in 1991? Help Justin, Serow, Versy, anybody. |
Title: Re: Part No caliper seals Post by verslagen1 on 03/20/12 at 15:35:10 They were made, just not distributed in US. Or it could be a '89 As far as caliper seals go... don't think they're different. check p/n's on someplace like suzukiboulevard dot com |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |