SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> 1986 ignition connection
/cgi-bin/YaBB.pl?num=1331661526

Message started by dfrnt7 on 03/13/12 at 10:58:45

Title: 1986 ignition connection
Post by dfrnt7 on 03/13/12 at 10:58:45

hey guys! im new hear and so glad i found yall! i have a 1986 savage i started chopping a while back and im stuck on this. hope someone can help! all i have left is a few button ups and its on the road.
so to my question.

what i have run into is a few wires pulled out of the ignition connection and i do not know what slot they go to. if anyone has a diagram or pictures of the wire side of the connection top and bootom that would be awesome! or even if you could look at your connecton and give what color wires go into what slot! please help i cant wait to ride this thing!

Title: Re: 1986 ignition connection
Post by verslagen1 on 03/13/12 at 11:27:24

Here's everything to know about the CDI box...

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1293638302/0

What's the front end out of?

Title: Re: 1986 ignition connection
Post by EJID on 03/13/12 at 11:55:26

Interesting chop you've got going there. :o

Looks like a full on custom hardtail frame, different front end, but you stuck with the stock belt setup rather than switching to a chain like every other "chop" I've seen.

You're going to have to give us some more drool-worthy details about what you've done with this bike! :-?

(I love the tank with sight gauge too!)

Title: Re: 1986 ignition connection
Post by dfrnt7 on 03/13/12 at 13:19:33

ive seen that diagram of the ignitor plug before but was not sure what year model it was for. 86 though? we'll try it out, but all fingers crossed! dont want to end up like those pics!!!

the front end is off af a dirt bike, not sure what make and model! i got it in a swap deal. im a big guy so i needed to make this little bike big enough to be comfortable! i did keep the sock drive train, built the frame around it actually! the last thing i did there was cut the swing arm and the upright tubes on the sock frame off, kind of hard to F it up that way! everything that is not stock on it, i made from scratch! even made some different bars then the ones you see. when i get it finished ill make sure i post all kinds of pics for yall