SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Swapping Cam questions /cgi-bin/YaBB.pl?num=1331346306 Message started by Ed L. on 03/09/12 at 18:25:06 |
Title: Swapping Cam questions Post by Ed L. on 03/09/12 at 18:25:06 I'm planning to swap out the stock cam on my '02 with a stage 1 and have a couple questions. Do I need to pull the timing chain cover for the job? Also will I have problems with the timing chain tensioner falling apart when I pull the gear from the cam and release the tension. Just want to get the ducks in a row before I spill oil all over the floor of my shop ;) |
Title: Re: Swapping Cam questions Post by verslagen1 on 03/09/12 at 18:38:11 yes yes, push it in and put a tab under the latch. you can make a tab from a doubled over zip tie. |
Title: Re: Swapping Cam questions Post by Ed L. on 03/09/12 at 19:21:49 Thanks, guess I'll be putting on the new timing chain also. If I'm going in that far might as well do everything at once. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |