SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Wiring /cgi-bin/YaBB.pl?num=1331221847 Message started by hieb on 03/08/12 at 07:50:47 |
Title: Wiring Post by hieb on 03/08/12 at 07:50:47 This is my 1st post would appreciate any help thanks. Building a 2003 LS 650 into a street tracker want to bypass all the safety wiring is their a way to use jumper wiring instead of redoing the whole harness? |
Title: Re: Wiring Post by Serowbot on 03/08/12 at 07:59:49 Clutch and kickstand cut-outs, yes... Just jumper the two wires together at any point along the path you want.. |
Title: Re: Wiring Post by verslagen1 on 03/08/12 at 09:15:34 When you pull the offending switch just short the leads together. A paperclip and some tape and you're golden. |
Title: Re: Wiring Post by hieb on 03/08/12 at 09:32:08 Thanks I got to fire |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |